[Sat Sep 24 07:12:09 2011] Detection parameters:
  Position = (312.7, 517.0) = 15 20 41.80 -57 10 11.3
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 33.1 +/- 7.9
  Background counts = 29.9
  Rate = 0.0003 +/- 8e-05

[Sat Sep 24 07:12:13 2011] Off-axis axis estimate = 0.21'
[Sat Sep 24 07:13:38 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:13:38 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Sep 24 07:13:38 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.841
[Sat Sep 24 07:13:38 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.41"
[Sat Sep 24 07:13:40 2011] fullrun_ccd7_acisf10062_pi14-548_cl_pass0_src17.ximg exists
[Sat Sep 24 07:13:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10062_pi14-548_cl_pass0_src17.csv
[Sat Sep 24 07:13:40 2011] fullrun_ccd7_acisf10062_pi14-548_cl_pass0_src17_1.ximg exists
[Sat Sep 24 07:13:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10062_pi14-548_cl_pass0_src17.csv
[Sat Sep 24 07:13:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10062_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10062_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:13:41 2011] fullrun_ccd7_acisf10062_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sat Sep 24 07:13:41 2011] fullrun_ccd7_acisf10062_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Sep 24 07:13:41 2011] Fit fullrun_ccd7_acisf10062_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Sep 24 07:14:08 2011] Spatial fit model total counts = 236.978000, observed total counts = 237.000000
[Sat Sep 24 07:14:08 2011] Offset between fit and detection position for source 3 = 0.703918 pixels
[Sat Sep 24 07:14:08 2011] 244.633200 total counts/ 209.926000 bgd. counts: snr = 2.395446
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.703918 pixels
  Position = (313.4, 517.3) = 15 20 41.79 -57 10 11.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 34.7 +/- 15.6
  Background counts = 209.9
  Rate = 0.0004 +/- 0.0002
[Sat Sep 24 07:14:08 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:14:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:14:08 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:14:08 2011] Source does appear to be extended
[Sat Sep 24 07:14:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:14:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:14:44 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Sep 24 07:14:44 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.404
[Sat Sep 24 07:14:44 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.38"
[Sat Sep 24 07:14:45 2011] fullrun_ccd7_acisf10062_pi14-548_cl_pass1_src17.ximg exists
[Sat Sep 24 07:14:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10062_pi14-548_cl_pass1_src17.csv
[Sat Sep 24 07:14:45 2011] fullrun_ccd7_acisf10062_pi14-548_cl_pass1_src17_1.ximg exists
[Sat Sep 24 07:14:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10062_pi14-548_cl_pass1_src17.csv
[Sat Sep 24 07:14:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10062_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10062_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:14:46 2011] fullrun_ccd7_acisf10062_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Sat Sep 24 07:14:46 2011] fullrun_ccd7_acisf10062_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Sep 24 07:14:46 2011] Fit fullrun_ccd7_acisf10062_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Sep 24 07:15:04 2011] Spatial fit model total counts = 236.992000, observed total counts = 237.000000
[Sat Sep 24 07:15:04 2011] Offset between fit and detection position for source 3 = 0.007751 pixels
[Sat Sep 24 07:15:04 2011] 244.627600 total counts/ 209.554000 bgd. counts: snr = 2.422883
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.007751 pixels
  Position = (313.4, 517.3) = 15 20 41.79 -57 10 11.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 35.1 +/- 15.6
  Background counts = 209.6
  Rate = 0.0004 +/- 0.0002
[Sat Sep 24 07:15:04 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:15:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:15:04 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:15:04 2011] Source does appear to be extended
[Sat Sep 24 07:15:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:19:03 2011] Not overwriting source region fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_src.reg
[Sat Sep 24 07:19:03 2011] Extracting stamp from image fullrun_ccd7_acisf10062_pi14-548_cl_sm2.00.img.gz, (296, 500) - (331, 535)
[Sat Sep 24 07:19:03 2011] Writing fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3.gif
[Sat Sep 24 07:20:21 2011] ../../acisf10062/products/events/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_src.evt and ../../acisf10062/products/events/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Sep 24 07:20:21 2011] Size of ../../acisf10062/products/events/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_src.evt.gz[events] = 56 counts
[Sat Sep 24 07:20:21 2011] Mean chipx,y = (209.52, 763.23)
[Sat Sep 24 07:20:21 2011] Mean tdetx,y = (4126.52, 2465.23)
[Sat Sep 24 07:20:21 2011] chipx,y range = (167.00-249.00, 721.00-804.00)
[Sat Sep 24 07:20:21 2011] Size of ../../acisf10062/products/events/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 323 counts
[Sat Sep 24 07:20:21 2011] ../../acisf10062/products/images/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_src.img and ../../acisf10062/products/images/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Sep 24 07:20:21 2011] ../../acisf10062/products/spectra/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_src.pi and ../../acisf10062/products/spectra/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Sep 24 07:20:21 2011] Not generating rmf since there are only 35 counts
[Sat Sep 24 07:20:25 2011] ../../acisf10062/products/lightcurves/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_src.lc and ../../acisf10062/products/lightcurves/fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Sep 24 07:21:43 2011] 232.232
[Sat Sep 24 07:21:48 2011] Updating aperture counts using extracted products
[Sat Sep 24 07:21:48 2011] Error reading totcts from fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Sep 24 07:21:49 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 07:21:49 2011] Using photon index=1.80, rate=0.000355, arf fullrun_ccd7_acisf10062_pi14-548_pass1_cl_src3.arf
[Sat Sep 24 07:21:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 07:21:49 2011] Updating source flux to 5e-15
[Sat Sep 24 07:22:17 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting