[Sat Sep 24 07:12:07 2011] Detection parameters:
  Position = (808.8, 272.2) = 15 21 12.34 -57 9 42.4
  Extent = 0.9" x 0.8", rotation angle = 36 degrees
  Source counts = 44.6 +/- 7.3
  Background counts = 8.4
  Rate = 0.0005 +/- 7e-05

[Sat Sep 24 07:12:09 2011] Off-axis axis estimate = 4.02'
[Sat Sep 24 07:13:35 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:13:35 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sat Sep 24 07:13:35 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Sat Sep 24 07:13:35 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.83"
[Sat Sep 24 07:13:35 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src5.ximg exists
[Sat Sep 24 07:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 07:13:35 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Sep 24 07:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 07:13:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Sep 24 07:13:36 2011] Fit fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Sep 24 07:14:01 2011] Spatial fit model total counts = 61.792300, observed total counts = 62.000000
[Sat Sep 24 07:14:01 2011] Offset between fit and detection position for source 4 = 0.937854 pixels
[Sat Sep 24 07:14:01 2011] 60.373700 total counts/ 15.062700 bgd. counts: snr = 11.674875
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.937854 pixels
  Position = (809.5, 272.9) = 15 21 12.33 -57 9 42.4
  Extent = 1.1 (0.9-1.5)", rotation angle = 0
  Source counts = 45.3 +/- 7.8
  Background counts = 15.1
  Rate = 0.0005 +/- 8e-05
[Sat Sep 24 07:14:01 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:14:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:14:01 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:14:01 2011] Source does appear to be extended
[Sat Sep 24 07:14:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:14:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:14:40 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Sat Sep 24 07:14:40 2011] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.071
[Sat Sep 24 07:14:40 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 1.06"
[Sat Sep 24 07:14:41 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src4.ximg exists
[Sat Sep 24 07:14:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src4.csv
[Sat Sep 24 07:14:41 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src4_1.ximg exists
[Sat Sep 24 07:14:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src4.csv
[Sat Sep 24 07:14:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:14:42 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sat Sep 24 07:14:43 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Sep 24 07:14:43 2011] Fit fullrun_ccd6_acisf10062_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Sep 24 07:14:58 2011] Spatial fit model total counts = 58.848300, observed total counts = 59.000000
[Sat Sep 24 07:14:58 2011] Offset between fit and detection position for source 4 = 0.371644 pixels
[Sat Sep 24 07:14:58 2011] 59.713900 total counts/ 10.849800 bgd. counts: snr = 14.834709
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.371644 pixels
  Position = (809.2, 272.6) = 15 21 12.34 -57 9 42.5
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 48.9 +/- 7.7
  Background counts = 10.8
  Rate = 0.0005 +/- 8e-05
[Sat Sep 24 07:14:58 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:14:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:14:58 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:14:58 2011] Source does appear to be extended
[Sat Sep 24 07:14:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:17:07 2011] Not overwriting source region fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_src.reg
[Sat Sep 24 07:17:07 2011] Extracting stamp from image fullrun_ccd6_acisf10062_pi14-548_cl_sm2.00.img.gz, (757, 221) - (861, 324)
[Sat Sep 24 07:17:07 2011] Writing fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4.gif
[Sat Sep 24 07:17:23 2011] ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_src.evt and ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sat Sep 24 07:17:23 2011] Size of ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_src.evt.gz[events] = 62 counts
[Sat Sep 24 07:17:23 2011] Mean chipx,y = (748.55, 839.19)
[Sat Sep 24 07:17:23 2011] Mean tdetx,y = (3623.55, 2541.19)
[Sat Sep 24 07:17:23 2011] chipx,y range = (707.00-793.00, 800.00-887.00)
[Sat Sep 24 07:17:23 2011] Size of ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 175 counts
[Sat Sep 24 07:17:23 2011] ../../acisf10062/products/images/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_src.img and ../../acisf10062/products/images/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sat Sep 24 07:17:23 2011] ../../acisf10062/products/spectra/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_src.pi and ../../acisf10062/products/spectra/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sat Sep 24 07:17:23 2011] Not generating rmf since there are only 48 counts
[Sat Sep 24 07:17:26 2011] ../../acisf10062/products/lightcurves/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_src.lc and ../../acisf10062/products/lightcurves/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sat Sep 24 07:19:00 2011] 198.986
[Sat Sep 24 07:21:48 2011] Updating aperture counts using extracted products
[Sat Sep 24 07:21:48 2011] Error reading totcts from fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Sep 24 07:21:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 07:21:48 2011] Using photon index=1.80, rate=0.000495, arf fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src4.arf
[Sat Sep 24 07:21:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 07:21:48 2011] Updating source flux to 8.3e-15
[Sat Sep 24 07:22:08 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting