[Sat Sep 24 07:12:09 2011] Detection parameters: Position = (967.1, 101.7) = 15 21 2.78 -57 11 6.5 Extent = 0.7" x 0.5", rotation angle = 46 degrees Source counts = 102.6 +/- 10.5 Background counts = 8.4 Rate = 0.001 +/- 0.0001 [Sat Sep 24 07:12:09 2011] Off-axis axis estimate = 2.91' [Sat Sep 24 07:13:35 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting [Sat Sep 24 07:13:35 2011] Initial guess for spatial extent in simple fitting = 0.56" [Sat Sep 24 07:13:35 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.109 [Sat Sep 24 07:13:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.56" [Sat Sep 24 07:13:35 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src3.ximg exists [Sat Sep 24 07:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src3.csv [Sat Sep 24 07:13:35 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src3_1.ximg exists [Sat Sep 24 07:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src3.csv [Sat Sep 24 07:13:35 2011] It looks like the fit did not converge You should probably delete fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src3.ximg exists [Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists [Sat Sep 24 07:13:36 2011] Fit fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly [Sat Sep 24 07:14:01 2011] Spatial fit model total counts = 117.106000, observed total counts = 117.000000 [Sat Sep 24 07:14:01 2011] Offset between fit and detection position for source 32 = 5.548290 pixels [Sat Sep 24 07:14:01 2011] 120.462044 total counts/ 120.462000 bgd. counts: snr = 0.000004 Spatial fit parameters: Offset between fit and detection position for source 32 = 5.548290 pixels Position = (971.6, 98.4) = 15 21 2.54 -57 11 8.3 Extent = 1.5 (0.1-2.9)", rotation angle = 0 Source counts = 0.0 +/- 11.0 Background counts = 120.5 Rate = 4e-10 +/- 0.0001 Deleting source due to low Poisson probability