[Sat Sep 24 07:12:07 2011] Detection parameters:
  Position = (1047.1, 250.6) = 15 20 57.93 -57 9 53.2
  Extent = 0.7" x 0.5", rotation angle = 24 degrees
  Source counts = 13.1 +/- 4.1
  Background counts = 3.9
  Rate = 0.0001 +/- 4e-05

[Sat Sep 24 07:12:09 2011] Off-axis axis estimate = 2.05'
[Sat Sep 24 07:13:35 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:13:35 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sat Sep 24 07:13:35 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.782
[Sat Sep 24 07:13:35 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.44"
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src17.ximg exists
[Sat Sep 24 07:13:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src17.csv
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src17_1.ximg exists
[Sat Sep 24 07:13:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src17.csv
[Sat Sep 24 07:13:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Sep 24 07:13:36 2011] Fit fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Sep 24 07:14:01 2011] Spatial fit model total counts = 27.999800, observed total counts = 28.000000
[Sat Sep 24 07:14:01 2011] Offset between fit and detection position for source 3 = 0.287419 pixels
[Sat Sep 24 07:14:01 2011] 28.028400 total counts/ 15.035900 bgd. counts: snr = 3.350642
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.287419 pixels
  Position = (1047.2, 250.9) = 15 20 57.95 -57 9 53.3
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 13.0 +/- 5.3
  Background counts = 15.0
  Rate = 0.0001 +/- 5e-05
[Sat Sep 24 07:14:01 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:14:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:14:01 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:14:01 2011] Source does appear to be extended
[Sat Sep 24 07:14:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:14:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:14:40 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sat Sep 24 07:14:40 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.182
[Sat Sep 24 07:14:40 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.66"
[Sat Sep 24 07:14:42 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src16.ximg exists
[Sat Sep 24 07:14:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src16.csv
[Sat Sep 24 07:14:42 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src16_1.ximg exists
[Sat Sep 24 07:14:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src16.csv
[Sat Sep 24 07:14:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:14:44 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Sat Sep 24 07:14:44 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Sep 24 07:14:44 2011] Fit fullrun_ccd6_acisf10062_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Sep 24 07:14:58 2011] Spatial fit model total counts = 27.999800, observed total counts = 28.000000
[Sat Sep 24 07:14:58 2011] Offset between fit and detection position for source 3 = 0.000002 pixels
[Sat Sep 24 07:14:58 2011] 28.028400 total counts/ 15.035900 bgd. counts: snr = 3.350642
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000002 pixels
  Position = (1047.2, 250.9) = 15 20 57.95 -57 9 53.3
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 13.0 +/- 5.3
  Background counts = 15.0
  Rate = 0.0001 +/- 5e-05
[Sat Sep 24 07:14:58 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:14:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:14:58 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:14:58 2011] Source does appear to be extended
[Sat Sep 24 07:14:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:17:10 2011] Not overwriting source region fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_src.reg
[Sat Sep 24 07:17:10 2011] Extracting stamp from image fullrun_ccd6_acisf10062_pi14-548_cl_sm2.00.img.gz, (1017, 221) - (1077, 281)
[Sat Sep 24 07:17:10 2011] Writing fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3.gif
[Sat Sep 24 07:18:11 2011] ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_src.evt and ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Sep 24 07:18:11 2011] Size of ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_src.evt.gz[events] = 17 counts
[Sat Sep 24 07:18:11 2011] Mean chipx,y = (978.00, 803.41)
[Sat Sep 24 07:18:11 2011] Mean tdetx,y = (3853.00, 2505.41)
[Sat Sep 24 07:18:11 2011] chipx,y range = (944.00-1023.00, 762.00-844.00)
[Sat Sep 24 07:18:11 2011] Size of ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 51 counts
[Sat Sep 24 07:18:11 2011] ../../acisf10062/products/images/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_src.img and ../../acisf10062/products/images/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Sep 24 07:18:11 2011] ../../acisf10062/products/spectra/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_src.pi and ../../acisf10062/products/spectra/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Sep 24 07:18:11 2011] Not generating rmf since there are only 12 counts
[Sat Sep 24 07:18:15 2011] ../../acisf10062/products/lightcurves/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_src.lc and ../../acisf10062/products/lightcurves/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Sep 24 07:19:02 2011] 207.325
[Sat Sep 24 07:21:48 2011] Updating aperture counts using extracted products
[Sat Sep 24 07:21:48 2011] Error reading totcts from fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Sep 24 07:21:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 07:21:48 2011] Using photon index=1.80, rate=0.000132, arf fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src3.arf
[Sat Sep 24 07:21:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 07:21:48 2011] Updating source flux to 2.1e-15
[Sat Sep 24 07:22:08 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting