[Sat Sep 24 07:12:07 2011] Detection parameters:
  Position = (909.3, 272.1) = 15 21 6.26 -57 9 42.6
  Extent = 0.8" x 0.7", rotation angle = 26 degrees
  Source counts = 10.9 +/- 3.9
  Background counts = 4.1
  Rate = 0.0001 +/- 4e-05

[Sat Sep 24 07:12:09 2011] Off-axis axis estimate = 3.19'
[Sat Sep 24 07:13:35 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:13:35 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Sep 24 07:13:35 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.967
[Sat Sep 24 07:13:35 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.62"
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src20.ximg exists
[Sat Sep 24 07:13:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src20.csv
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src20_1.ximg exists
[Sat Sep 24 07:13:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src20.csv
[Sat Sep 24 07:13:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10062_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sat Sep 24 07:13:36 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Sep 24 07:13:36 2011] Fit fullrun_ccd6_acisf10062_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Sep 24 07:14:01 2011] Spatial fit model total counts = 23.856000, observed total counts = 25.000000
[Sat Sep 24 07:14:01 2011] Offset between fit and detection position for source 10 = 1.359353 pixels
[Sat Sep 24 07:14:01 2011] 24.182890 total counts/ 4.879390 bgd. counts: snr = 8.738830
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.359353 pixels
  Position = (908.1, 271.5) = 15 21 6.36 -57 9 43.1
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 19.3 +/- 4.9
  Background counts = 4.9
  Rate = 0.0002 +/- 5e-05
[Sat Sep 24 07:14:01 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:14:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:14:01 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:14:01 2011] Source does appear to be extended
[Sat Sep 24 07:14:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:14:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:14:40 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Sat Sep 24 07:14:40 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Sat Sep 24 07:14:40 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.50"
[Sat Sep 24 07:14:42 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src18.ximg exists
[Sat Sep 24 07:14:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src18.csv
[Sat Sep 24 07:14:42 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src18_1.ximg exists
[Sat Sep 24 07:14:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src18.csv
[Sat Sep 24 07:14:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10062_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:14:44 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sat Sep 24 07:14:44 2011] fullrun_ccd6_acisf10062_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Sep 24 07:14:44 2011] Fit fullrun_ccd6_acisf10062_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Sep 24 07:14:58 2011] Source 10 is offset by -1.706683 and -0.143122 pixels which is larger than
2 X fitted extent = 1.558534 x 1.558534, not incorporating fit results
[Sat Sep 24 07:14:58 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:14:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:14:58 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:14:58 2011] Source does appear to be extended
[Sat Sep 24 07:14:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:17:10 2011] Not overwriting source region fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_src.reg
[Sat Sep 24 07:17:10 2011] Extracting stamp from image fullrun_ccd6_acisf10062_pi14-548_cl_sm2.00.img.gz, (840, 203) - (977, 340)
[Sat Sep 24 07:17:10 2011] Writing fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10.gif
[Sat Sep 24 07:18:26 2011] ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_src.evt and ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Sep 24 07:18:26 2011] Size of ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_src.evt.gz[events] = 36 counts
[Sat Sep 24 07:18:26 2011] Mean chipx,y = (844.67, 820.31)
[Sat Sep 24 07:18:26 2011] Mean tdetx,y = (3719.67, 2522.31)
[Sat Sep 24 07:18:26 2011] chipx,y range = (795.00-890.00, 786.00-866.00)
[Sat Sep 24 07:18:26 2011] Size of ../../acisf10062/products/events/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 321 counts
[Sat Sep 24 07:18:26 2011] ../../acisf10062/products/images/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_src.img and ../../acisf10062/products/images/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Sep 24 07:18:26 2011] ../../acisf10062/products/spectra/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_src.pi and ../../acisf10062/products/spectra/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Sep 24 07:18:26 2011] Not generating rmf since there are only 19 counts
[Sat Sep 24 07:18:29 2011] ../../acisf10062/products/lightcurves/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_src.lc and ../../acisf10062/products/lightcurves/fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Sep 24 07:19:02 2011] 203.2
[Sat Sep 24 07:21:48 2011] Updating aperture counts using extracted products
[Sat Sep 24 07:21:48 2011] Error reading totcts from fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Sep 24 07:21:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 07:21:48 2011] Using photon index=1.80, rate=0.000196, arf fullrun_ccd6_acisf10062_pi14-548_pass1_cl_src10.arf
[Sat Sep 24 07:21:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 07:21:48 2011] Updating source flux to 3.2e-15
[Sat Sep 24 07:22:08 2011] Flag b found in src. 10 procflags, skipping spectral fitting
[Sat Sep 24 07:22:08 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting