[Sat Sep 24 07:12:05 2011] Detection parameters:
  Position = (366.6, 1070.6) = 15 20 49.81 -57 16 48.5
  Extent = 1.2" x 0.8", rotation angle = 72 degrees
  Source counts = 36.5 +/- 7.1
  Background counts = 13.5
  Rate = 0.0004 +/- 7e-05

[Sat Sep 24 07:12:06 2011] Off-axis axis estimate = 6.85'
[Sat Sep 24 07:13:33 2011] Using EEF radius (= 2.09 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:13:33 2011] Initial guess for spatial extent in simple fitting = 2.09"
[Sat Sep 24 07:13:33 2011] source mask rpix=4.3, npix_max = 90, mask sum = 81, frac = 0.897
[Sat Sep 24 07:13:33 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 2.09"
[Sat Sep 24 07:13:33 2011] fullrun_ccd3_acisf10062_pi14-548_cl_pass0_src8.ximg exists
[Sat Sep 24 07:13:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10062_pi14-548_cl_pass0_src8.csv
[Sat Sep 24 07:13:34 2011] fullrun_ccd3_acisf10062_pi14-548_cl_pass0_src8_1.ximg exists
[Sat Sep 24 07:13:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10062_pi14-548_cl_pass0_src8.csv
[Sat Sep 24 07:13:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10062_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10062_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:13:34 2011] fullrun_ccd3_acisf10062_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sat Sep 24 07:13:34 2011] fullrun_ccd3_acisf10062_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Sep 24 07:13:34 2011] Fit fullrun_ccd3_acisf10062_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Sep 24 07:13:57 2011] Spatial fit model total counts = 58.518500, observed total counts = 59.000000
[Sat Sep 24 07:13:57 2011] Offset between fit and detection position for source 4 = 1.862850 pixels
[Sat Sep 24 07:13:57 2011] 57.647500 total counts/ 15.804500 bgd. counts: snr = 10.525250
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.862850 pixels
  Position = (368.0, 1071.9) = 15 20 49.76 -57 16 48.1
  Extent = 1.7 (1.2-2.4)", rotation angle = 0
  Source counts = 41.8 +/- 7.6
  Background counts = 15.8
  Rate = 0.0004 +/- 8e-05
[Sat Sep 24 07:13:57 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:13:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:13:57 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:13:57 2011] Source does appear to be extended
[Sat Sep 24 07:13:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:14:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:14:37 2011] Initial guess for spatial extent in simple fitting = 1.69"
[Sat Sep 24 07:14:37 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.037
[Sat Sep 24 07:14:37 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 1.69"
[Sat Sep 24 07:14:38 2011] fullrun_ccd3_acisf10062_pi14-548_cl_pass1_src8.ximg exists
[Sat Sep 24 07:14:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10062_pi14-548_cl_pass1_src8.csv
[Sat Sep 24 07:14:38 2011] fullrun_ccd3_acisf10062_pi14-548_cl_pass1_src8_1.ximg exists
[Sat Sep 24 07:14:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10062_pi14-548_cl_pass1_src8.csv
[Sat Sep 24 07:14:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10062_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10062_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:14:39 2011] fullrun_ccd3_acisf10062_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sat Sep 24 07:14:39 2011] fullrun_ccd3_acisf10062_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Sep 24 07:14:39 2011] Fit fullrun_ccd3_acisf10062_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Sep 24 07:14:56 2011] Spatial fit model total counts = 50.998100, observed total counts = 51.000000
[Sat Sep 24 07:14:56 2011] Offset between fit and detection position for source 4 = 0.674348 pixels
[Sat Sep 24 07:14:56 2011] 50.976000 total counts/ 11.104700 bgd. counts: snr = 11.964842
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.674348 pixels
  Position = (367.6, 1071.3) = 15 20 49.78 -57 16 48.4
  Extent = 1.6 (1.2-1.9)", rotation angle = 0
  Source counts = 39.9 +/- 7.1
  Background counts = 11.1
  Rate = 0.0004 +/- 7e-05
[Sat Sep 24 07:14:56 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:14:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:14:56 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:14:56 2011] Source does appear to be extended
[Sat Sep 24 07:14:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:16:00 2011] Not overwriting source region fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_src.reg
[Sat Sep 24 07:16:00 2011] Extracting stamp from image fullrun_ccd3_acisf10062_pi14-548_cl_sm2.00.img.gz, (295, 999) - (440, 1144)
[Sat Sep 24 07:16:00 2011] Writing fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4.gif
[Sat Sep 24 07:16:21 2011] ../../acisf10062/products/events/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_src.evt and ../../acisf10062/products/events/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sat Sep 24 07:16:21 2011] Size of ../../acisf10062/products/events/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_src.evt.gz[events] = 53 counts
[Sat Sep 24 07:16:21 2011] Mean chipx,y = (221.74, 905.51)
[Sat Sep 24 07:16:21 2011] Mean tdetx,y = (4226.49, 3282.74)
[Sat Sep 24 07:16:21 2011] chipx,y range = (169.00-262.00, 862.00-956.00)
[Sat Sep 24 07:16:21 2011] Size of ../../acisf10062/products/events/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 232 counts
[Sat Sep 24 07:16:21 2011] ../../acisf10062/products/images/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_src.img and ../../acisf10062/products/images/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sat Sep 24 07:16:21 2011] ../../acisf10062/products/spectra/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_src.pi and ../../acisf10062/products/spectra/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sat Sep 24 07:16:21 2011] Not generating rmf since there are only 39 counts
[Sat Sep 24 07:16:24 2011] ../../acisf10062/products/lightcurves/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_src.lc and ../../acisf10062/products/lightcurves/fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sat Sep 24 07:17:05 2011] 176.784
[Sat Sep 24 07:21:47 2011] Updating aperture counts using extracted products
[Sat Sep 24 07:21:47 2011] Error reading totcts from fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Sep 24 07:21:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 07:21:48 2011] Using photon index=1.80, rate=0.000404, arf fullrun_ccd3_acisf10062_pi14-548_pass1_cl_src4.arf
[Sat Sep 24 07:21:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 07:21:48 2011] Updating source flux to 7.5e-15
[Sat Sep 24 07:21:53 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting