[Fri Sep 23 13:23:33 2011] Detection parameters:
  Position = (345.3, 240.4) = 17 48 52.60 -20 21 40.8
  Extent = 0.5" x 0.5", rotation angle = 37 degrees
  Source counts = 96.0 +/- 13.1
  Background counts = 76.0
  Rate = 0.002 +/- 0.0003

[Fri Sep 23 13:23:40 2011] Off-axis axis estimate = 0.21'
[Fri Sep 23 13:24:23 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:24:23 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Sep 23 13:24:23 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.262
[Fri Sep 23 13:24:23 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.41"
[Fri Sep 23 13:24:25 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src21.ximg exists
[Fri Sep 23 13:24:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src21.csv
[Fri Sep 23 13:24:25 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src21_1.ximg exists
[Fri Sep 23 13:24:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src21.csv
[Fri Sep 23 13:24:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:24:31 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Fri Sep 23 13:24:31 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Sep 23 13:24:31 2011] Fit fullrun_ccd7_acisf10060_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Sep 23 13:24:51 2011] Spatial fit model total counts = 730.000000, observed total counts = 730.000000
[Fri Sep 23 13:24:51 2011] Offset between fit and detection position for source 8 = 0.514496 pixels
[Fri Sep 23 13:24:51 2011] 602.079700 total counts/ 540.750000 bgd. counts: snr = 2.637379
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.514496 pixels
  Position = (345.7, 240.7) = 17 48 52.60 -20 21 40.9
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 61.3 +/- 24.5
  Background counts = 540.8
  Rate = 0.001 +/- 0.0005
[Fri Sep 23 13:24:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:24:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:24:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:24:51 2011] Source does appear to be extended
[Fri Sep 23 13:24:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:25:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:25:07 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Fri Sep 23 13:25:07 2011] source mask rpix=0.7, npix_max = 6, mask sum = 6, frac = 0.989
[Fri Sep 23 13:25:07 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.36"
[Fri Sep 23 13:25:09 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src21.ximg exists
[Fri Sep 23 13:25:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src21.csv
[Fri Sep 23 13:25:09 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src21_1.ximg exists
[Fri Sep 23 13:25:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src21.csv
[Fri Sep 23 13:25:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:25:10 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Fri Sep 23 13:25:10 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Sep 23 13:25:10 2011] Fit fullrun_ccd7_acisf10060_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Sep 23 13:25:29 2011] Spatial fit model total counts = 729.999000, observed total counts = 730.000000
[Fri Sep 23 13:25:29 2011] Offset between fit and detection position for source 8 = 0.002309 pixels
[Fri Sep 23 13:25:29 2011] 634.584900 total counts/ 574.703000 bgd. counts: snr = 2.497893
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.002309 pixels
  Position = (345.8, 240.7) = 17 48 52.60 -20 21 40.9
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 59.9 +/- 25.2
  Background counts = 574.7
  Rate = 0.001 +/- 0.0005
[Fri Sep 23 13:25:29 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:25:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:25:29 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:25:29 2011] Source does appear to be extended
[Fri Sep 23 13:25:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:26:17 2011] Not overwriting source region fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_src.reg
[Fri Sep 23 13:26:17 2011] Extracting stamp from image fullrun_ccd7_acisf10060_pi14-548_cl_sm2.00.img.gz, (329, 224) - (362, 257)
[Fri Sep 23 13:26:17 2011] Writing fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8.gif
[Fri Sep 23 13:27:39 2011] ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_src.evt and ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Fri Sep 23 13:27:39 2011] Size of ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_src.evt.gz[events] = 103 counts
[Fri Sep 23 13:27:39 2011] Mean chipx,y = (208.30, 522.93)
[Fri Sep 23 13:27:39 2011] Mean tdetx,y = (4125.30, 2224.93)
[Fri Sep 23 13:27:39 2011] chipx,y range = (190.00-225.00, 504.00-539.00)
[Fri Sep 23 13:27:39 2011] Size of ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 341 counts
[Fri Sep 23 13:27:39 2011] ../../acisf10060/products/images/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_src.img and ../../acisf10060/products/images/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Fri Sep 23 13:27:39 2011] ../../acisf10060/products/spectra/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_src.pi and ../../acisf10060/products/spectra/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Fri Sep 23 13:27:39 2011] Not generating rmf since there are only 59 counts
[Fri Sep 23 13:27:42 2011] ../../acisf10060/products/lightcurves/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_src.lc and ../../acisf10060/products/lightcurves/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Fri Sep 23 13:32:09 2011] 235.476
[Fri Sep 23 13:32:25 2011] Updating aperture counts using extracted products
[Fri Sep 23 13:32:25 2011] Error reading totcts from fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8_src.pi.gz
[Fri Sep 23 13:32:26 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 13:32:26 2011] Using photon index=1.80, rate=0.00122, arf fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src8.arf
[Fri Sep 23 13:32:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 13:32:26 2011] Updating source flux to 1.1e-14
[Fri Sep 23 13:32:35 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting