[Fri Sep 23 13:23:33 2011] Detection parameters:
  Position = (329.2, 243.9) = 17 48 53.17 -20 21 39.1
  Extent = 0.5" x 0.5", rotation angle = 81 degrees
  Source counts = 393.6 +/- 21.7
  Background counts = 79.4
  Rate = 0.008 +/- 0.0004

[Fri Sep 23 13:23:40 2011] Off-axis axis estimate = 0.18'
[Fri Sep 23 13:24:23 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:24:23 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Sep 23 13:24:23 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.835
[Fri Sep 23 13:24:23 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.41"
[Fri Sep 23 13:24:25 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 23 13:24:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 13:24:25 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 23 13:24:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 13:24:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:24:30 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 23 13:24:30 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 23 13:24:30 2011] Fit fullrun_ccd7_acisf10060_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 23 13:24:51 2011] Spatial fit model total counts = 821.698000, observed total counts = 821.000000
[Fri Sep 23 13:24:51 2011] Offset between fit and detection position for source 6 = 0.735416 pixels
[Fri Sep 23 13:24:51 2011] 789.575000 total counts/ 417.498000 bgd. counts: snr = 18.209819
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.735416 pixels
  Position = (329.7, 244.5) = 17 48 53.17 -20 21 39.1
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 372.1 +/- 28.1
  Background counts = 417.5
  Rate = 0.008 +/- 0.0006
[Fri Sep 23 13:24:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:24:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:24:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:24:51 2011] Source does appear to be extended
[Fri Sep 23 13:24:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:25:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:25:07 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 23 13:25:07 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.373
[Fri Sep 23 13:25:07 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.38"
[Fri Sep 23 13:25:08 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 23 13:25:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 13:25:08 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 23 13:25:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 13:25:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:25:10 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 23 13:25:10 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 23 13:25:10 2011] Fit fullrun_ccd7_acisf10060_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 23 13:25:29 2011] Spatial fit model total counts = 900.581000, observed total counts = 896.000000
[Fri Sep 23 13:25:29 2011] Offset between fit and detection position for source 6 = 0.000938 pixels
[Fri Sep 23 13:25:29 2011] 880.198000 total counts/ 515.531000 bgd. counts: snr = 16.060870
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.000938 pixels
  Position = (329.7, 244.5) = 17 48 53.17 -20 21 39.1
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 364.7 +/- 29.7
  Background counts = 515.5
  Rate = 0.007 +/- 0.0006
[Fri Sep 23 13:25:29 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:25:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:25:29 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:25:29 2011] Source does appear to be extended
[Fri Sep 23 13:25:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:26:16 2011] Not overwriting source region fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 23 13:26:16 2011] Extracting stamp from image fullrun_ccd7_acisf10060_pi14-548_cl_sm2.00.img.gz, (312, 227) - (347, 262)
[Fri Sep 23 13:26:16 2011] Writing fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6.gif
[Fri Sep 23 13:26:32 2011] ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_src.evt and ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 23 13:26:32 2011] Size of ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_src.evt.gz[events] = 419 counts
[Fri Sep 23 13:26:32 2011] Mean chipx,y = (212.89, 506.11)
[Fri Sep 23 13:26:32 2011] Mean tdetx,y = (4129.89, 2208.11)
[Fri Sep 23 13:26:32 2011] chipx,y range = (194.00-230.00, 488.00-524.00)
[Fri Sep 23 13:26:32 2011] Size of ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 257 counts
[Fri Sep 23 13:26:32 2011] ../../acisf10060/products/images/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_src.img and ../../acisf10060/products/images/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 23 13:26:32 2011] ../../acisf10060/products/spectra/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_src.pi and ../../acisf10060/products/spectra/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 23 13:26:36 2011] ../../acisf10060/products/lightcurves/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_src.lc and ../../acisf10060/products/lightcurves/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 23 13:32:05 2011] Keeping rmf generated by specextract
[Fri Sep 23 13:32:05 2011] 235.48
[Fri Sep 23 13:32:25 2011] Updating aperture counts using extracted products
[Fri Sep 23 13:32:25 2011] Error reading totcts from fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 23 13:32:26 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 13:32:26 2011] Using photon index=1.80, rate=0.00742, arf fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src6.arf
[Fri Sep 23 13:32:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 13:32:26 2011] Updating source flux to 6.5e-14