[Fri Sep 23 13:23:33 2011] Detection parameters:
  Position = (338.4, 253.8) = 17 48 52.84 -20 21 34.2
  Extent = 0.6" x 0.5", rotation angle = 78 degrees
  Source counts = 248.2 +/- 18.9
  Background counts = 107.8
  Rate = 0.005 +/- 0.0004

[Fri Sep 23 13:23:40 2011] Off-axis axis estimate = 0.28'
[Fri Sep 23 13:24:23 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:24:23 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Sep 23 13:24:23 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.281
[Fri Sep 23 13:24:23 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.41"
[Fri Sep 23 13:24:25 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src6.ximg exists
[Fri Sep 23 13:24:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src6.csv
[Fri Sep 23 13:24:25 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Sep 23 13:24:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src6.csv
[Fri Sep 23 13:24:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10060_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:24:31 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Sep 23 13:24:31 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Sep 23 13:24:31 2011] Fit fullrun_ccd7_acisf10060_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Sep 23 13:24:51 2011] Spatial fit model total counts = 963.998000, observed total counts = 964.000000
[Fri Sep 23 13:24:51 2011] Offset between fit and detection position for source 3 = 0.932828 pixels
[Fri Sep 23 13:24:51 2011] 984.786000 total counts/ 850.187000 bgd. counts: snr = 4.616200
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.932828 pixels
  Position = (338.9, 254.6) = 17 48 52.84 -20 21 34.1
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 134.6 +/- 31.4
  Background counts = 850.2
  Rate = 0.003 +/- 0.0006
[Fri Sep 23 13:24:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:24:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:24:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:24:51 2011] Source does appear to be extended
[Fri Sep 23 13:24:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:25:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:25:07 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Fri Sep 23 13:25:07 2011] source mask rpix=0.7, npix_max = 6, mask sum = 6, frac = 0.996
[Fri Sep 23 13:25:07 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.36"
[Fri Sep 23 13:25:08 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src6.ximg exists
[Fri Sep 23 13:25:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src6.csv
[Fri Sep 23 13:25:08 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Sep 23 13:25:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src6.csv
[Fri Sep 23 13:25:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10060_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:25:10 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Sep 23 13:25:10 2011] fullrun_ccd7_acisf10060_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Sep 23 13:25:10 2011] Fit fullrun_ccd7_acisf10060_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Sep 23 13:25:29 2011] Spatial fit model total counts = 973.991000, observed total counts = 974.000000
[Fri Sep 23 13:25:29 2011] Offset between fit and detection position for source 3 = 0.006510 pixels
[Fri Sep 23 13:25:29 2011] 972.570000 total counts/ 835.667000 bgd. counts: snr = 4.735833
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006510 pixels
  Position = (338.9, 254.6) = 17 48 52.84 -20 21 34.1
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 136.9 +/- 31.2
  Background counts = 835.7
  Rate = 0.003 +/- 0.0006
[Fri Sep 23 13:25:29 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:25:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:25:29 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:25:29 2011] Source does appear to be extended
[Fri Sep 23 13:25:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:26:17 2011] Not overwriting source region fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 23 13:26:17 2011] Extracting stamp from image fullrun_ccd7_acisf10060_pi14-548_cl_sm2.00.img.gz, (322, 238) - (355, 271)
[Fri Sep 23 13:26:17 2011] Writing fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3.gif
[Fri Sep 23 13:26:45 2011] ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_src.evt and ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 23 13:26:45 2011] Size of ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_src.evt.gz[events] = 223 counts
[Fri Sep 23 13:26:45 2011] Mean chipx,y = (221.96, 515.91)
[Fri Sep 23 13:26:45 2011] Mean tdetx,y = (4138.96, 2217.91)
[Fri Sep 23 13:26:45 2011] chipx,y range = (203.00-240.00, 498.00-533.00)
[Fri Sep 23 13:26:45 2011] Size of ../../acisf10060/products/events/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 370 counts
[Fri Sep 23 13:26:45 2011] ../../acisf10060/products/images/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_src.img and ../../acisf10060/products/images/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 23 13:26:45 2011] ../../acisf10060/products/spectra/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_src.pi and ../../acisf10060/products/spectra/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 23 13:26:48 2011] ../../acisf10060/products/lightcurves/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_src.lc and ../../acisf10060/products/lightcurves/fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 23 13:32:06 2011] Keeping rmf generated by specextract
[Fri Sep 23 13:32:06 2011] 235.696
[Fri Sep 23 13:32:25 2011] Updating aperture counts using extracted products
[Fri Sep 23 13:32:25 2011] Error reading totcts from fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 23 13:32:26 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 13:32:26 2011] Using photon index=1.80, rate=0.00279, arf fullrun_ccd7_acisf10060_pi14-548_pass1_cl_src3.arf
[Fri Sep 23 13:32:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 13:32:26 2011] Updating source flux to 2.4e-14