[Sat Oct  8 22:45:30 2011] Detection parameters:
  Position = (419.7, 811.8) = 17 48 1.29 -24 50 37.9
  Extent = 0.6" x 0.5", rotation angle = 144 degrees
  Source counts = 17.4 +/- 4.4
  Background counts = 1.6
  Rate = 0.0005 +/- 0.0001

[Sat Oct  8 22:45:30 2011] Off-axis axis estimate = 3.73'
[Sat Oct  8 22:46:00 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 22:46:00 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Sat Oct  8 22:46:00 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.971
[Sat Oct  8 22:46:00 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.75"
[Sat Oct  8 22:46:00 2011] fullrun_ccd6_acisf10059_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct  8 22:46:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10059_pi14-548_cl_pass0_src10.csv
[Sat Oct  8 22:46:00 2011] fullrun_ccd6_acisf10059_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct  8 22:46:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10059_pi14-548_cl_pass0_src10.csv
[Sat Oct  8 22:46:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10059_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10059_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 22:46:00 2011] fullrun_ccd6_acisf10059_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct  8 22:46:01 2011] fullrun_ccd6_acisf10059_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct  8 22:46:01 2011] Fit fullrun_ccd6_acisf10059_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct  8 22:46:13 2011] Spatial fit model total counts = 26.431600, observed total counts = 27.000000
[Sat Oct  8 22:46:13 2011] Offset between fit and detection position for source 16 = 0.712575 pixels
[Sat Oct  8 22:46:13 2011] 27.460220 total counts/ 9.666820 bgd. counts: snr = 5.722913
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.712575 pixels
  Position = (420.2, 812.3) = 17 48 1.29 -24 50 37.9
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 17.8 +/- 5.2
  Background counts = 9.7
  Rate = 0.0005 +/- 0.0001
[Sat Oct  8 22:46:13 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 22:46:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 22:46:13 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 22:46:13 2011] Source does appear to be extended
[Sat Oct  8 22:46:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 22:46:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 22:46:33 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Sat Oct  8 22:46:33 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.158
[Sat Oct  8 22:46:33 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.67"
[Sat Oct  8 22:46:37 2011] fullrun_ccd6_acisf10059_pi14-548_cl_pass1_src10.ximg exists
[Sat Oct  8 22:46:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10059_pi14-548_cl_pass1_src10.csv
[Sat Oct  8 22:46:37 2011] fullrun_ccd6_acisf10059_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Oct  8 22:46:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10059_pi14-548_cl_pass1_src10.csv
[Sat Oct  8 22:46:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10059_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10059_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 22:46:38 2011] fullrun_ccd6_acisf10059_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Oct  8 22:46:38 2011] fullrun_ccd6_acisf10059_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Oct  8 22:46:38 2011] Fit fullrun_ccd6_acisf10059_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Oct  8 22:46:48 2011] Spatial fit model total counts = 26.351500, observed total counts = 27.000000
[Sat Oct  8 22:46:48 2011] Offset between fit and detection position for source 16 = 0.009592 pixels
[Sat Oct  8 22:46:48 2011] 27.356020 total counts/ 9.780520 bgd. counts: snr = 5.619876
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.009592 pixels
  Position = (420.2, 812.3) = 17 48 1.29 -24 50 37.9
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 17.6 +/- 5.2
  Background counts = 9.8
  Rate = 0.0005 +/- 0.0001
[Sat Oct  8 22:46:48 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 22:46:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 22:46:48 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 22:46:48 2011] Source does appear to be extended
[Sat Oct  8 22:46:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 22:47:02 2011] Not overwriting source region fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_src.reg
[Sat Oct  8 22:47:02 2011] Extracting stamp from image fullrun_ccd6_acisf10059_pi14-548_cl_sm2.00.img.gz, (390, 782) - (451, 843)
[Sat Oct  8 22:47:02 2011] Writing fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16.gif
[Sat Oct  8 22:47:48 2011] ../../acisf10059/products/events/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_src.evt and ../../acisf10059/products/events/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Sat Oct  8 22:47:48 2011] Size of ../../acisf10059/products/events/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_src.evt.gz[events] = 21 counts
[Sat Oct  8 22:47:48 2011] Mean chipx,y = (802.90, 636.33)
[Sat Oct  8 22:47:48 2011] Mean tdetx,y = (3677.90, 2338.33)
[Sat Oct  8 22:47:48 2011] chipx,y range = (781.00-819.00, 621.00-656.00)
[Sat Oct  8 22:47:48 2011] Size of ../../acisf10059/products/events/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 25 counts
[Sat Oct  8 22:47:48 2011] ../../acisf10059/products/images/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_src.img and ../../acisf10059/products/images/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Sat Oct  8 22:47:48 2011] ../../acisf10059/products/spectra/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_src.pi and ../../acisf10059/products/spectra/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Sat Oct  8 22:47:48 2011] Not generating rmf since there are only 17 counts
[Sat Oct  8 22:47:50 2011] ../../acisf10059/products/lightcurves/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_src.lc and ../../acisf10059/products/lightcurves/fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Sat Oct  8 22:47:54 2011] 203.505
[Sat Oct  8 22:50:34 2011] Updating aperture counts using extracted products
[Sat Oct  8 22:50:34 2011] Error reading totcts from fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16_src.pi.gz
[Sat Oct  8 22:50:34 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 22:50:34 2011] Using photon index=1.80, rate=0.000485, arf fullrun_ccd6_acisf10059_pi14-548_pass1_cl_src16.arf
[Sat Oct  8 22:50:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 22:50:34 2011] Updating source flux to 6.2e-15
[Sat Oct  8 22:50:36 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting