[Sun Oct 16 23:36:01 2011] Detection parameters:
  Position = (614.5, 1089.1) = 17 34 58.50 -26 6 31.0
  Extent = 2.8" x 1.6", rotation angle = 125 degrees
  Source counts = 10.9 +/- 4.2
  Background counts = 7.1
  Rate = 0.0004 +/- 0.0001

[Sun Oct 16 23:36:01 2011] Off-axis axis estimate = 10.35'
[Sun Oct 16 23:36:44 2011] Using EEF radius (= 4.75 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 23:36:44 2011] Initial guess for spatial extent in simple fitting = 4.75"
[Sun Oct 16 23:36:44 2011] source mask rpix=9.7, npix_max = 413, mask sum = 420, frac = 1.017
[Sun Oct 16 23:36:44 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 4.75"
[Sun Oct 16 23:36:45 2011] fullrun_ccd3_acisf10037_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 16 23:36:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10037_pi14-548_cl_pass0_src3.csv
[Sun Oct 16 23:36:45 2011] fullrun_ccd3_acisf10037_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 16 23:36:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10037_pi14-548_cl_pass0_src3.csv
[Sun Oct 16 23:36:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10037_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10037_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 23:36:45 2011] fullrun_ccd3_acisf10037_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 16 23:36:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10037_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Oct 16 23:36:45 2011] fullrun_ccd3_acisf10037_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 16 23:36:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10037_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Oct 16 23:36:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10037_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10037_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 23:36:52 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 55.638696 pixels away
[Sun Oct 16 23:36:52 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 23:36:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 23:36:52 2011] Assessing source extent using major
[Sun Oct 16 23:36:52 2011] Source does appear to be extended
[Sun Oct 16 23:36:52 2011] Computing asymmetry using major and minor axis, asym = 1.77
[Sun Oct 16 23:36:52 2011] Source is asymmetric
[Sun Oct 16 23:37:15 2011] Using EEF radius (= 4.75 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 23:37:15 2011] Initial guess for spatial extent in simple fitting = 4.75"
[Sun Oct 16 23:37:15 2011] source mask rpix=9.7, npix_max = 413, mask sum = 420, frac = 1.017
[Sun Oct 16 23:37:15 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.75"
[Sun Oct 16 23:37:16 2011] fullrun_ccd3_acisf10037_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 16 23:37:16 2011] fullrun_ccd3_acisf10037_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 16 23:37:16 2011] Fit fullrun_ccd3_acisf10037_pi14-548_cl_pass1_src3 appears to have run properly
[Sun Oct 16 23:37:16 2011] fullrun_ccd3_acisf10037_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 16 23:37:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10037_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Oct 16 23:37:16 2011] fullrun_ccd3_acisf10037_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 16 23:37:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10037_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Oct 16 23:37:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10037_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10037_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 23:37:22 2011] Spatial fit model total counts = 33.904100, observed total counts = 37.000000
[Sun Oct 16 23:37:22 2011] Offset between fit and detection position for source 3 = 3.212263 pixels
[Sun Oct 16 23:37:22 2011] 33.585200 total counts/ 20.765600 bgd. counts: snr = 2.813211
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.212263 pixels
  Position = (613.8, 1092.3) = 17 34 58.54 -26 6 29.7
  Extent = 2.3 (1.2-3.5)", rotation angle = 0
  Source counts = 12.8 +/- 5.8
  Background counts = 20.8
  Rate = 0.0004 +/- 0.0002
[Sun Oct 16 23:37:22 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 23:37:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 23:37:22 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 23:37:22 2011] Source does appear to be extended
[Sun Oct 16 23:37:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 23:38:05 2011] Not overwriting source region fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 16 23:38:05 2011] Extracting stamp from image fullrun_ccd3_acisf10037_pi14-548_cl_sm2.00.img.gz, (509, 988) - (718, 1175)
[Sun Oct 16 23:38:05 2011] Writing fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3.gif
[Sun Oct 16 23:38:08 2011] ../../acisf10037/products/events/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_src.evt and ../../acisf10037/products/events/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 16 23:38:08 2011] Size of ../../acisf10037/products/events/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_src.evt.gz[events] = 18 counts
[Sun Oct 16 23:38:08 2011] Mean chipx,y = (412.28, 1003.83)
[Sun Oct 16 23:38:08 2011] Mean tdetx,y = (4128.17, 3473.28)
[Sun Oct 16 23:38:08 2011] chipx,y range = (391.00-431.00, 991.00-1016.00)
[Sun Oct 16 23:38:08 2011] Size of ../../acisf10037/products/events/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 91 counts
[Sun Oct 16 23:38:08 2011] ../../acisf10037/products/images/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_src.img and ../../acisf10037/products/images/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 16 23:38:08 2011] ../../acisf10037/products/spectra/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_src.pi and ../../acisf10037/products/spectra/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Oct 16 23:38:08 2011] Not generating rmf since there are only 12 counts
[Sun Oct 16 23:38:11 2011] ../../acisf10037/products/lightcurves/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_src.lc and ../../acisf10037/products/lightcurves/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 16 23:38:12 2011] 138.962
[Sun Oct 16 23:40:11 2011] Updating aperture counts using extracted products
[Sun Oct 16 23:40:11 2011] Error reading totcts from fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct 16 23:40:11 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 23:40:11 2011] Using photon index=1.80, rate=0.000416, arf fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3.arf
[Sun Oct 16 23:40:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 23:40:11 2011] Updating source flux to 6.7e-15
[Sun Oct 16 23:40:15 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 23:40:16 2011] acisf10037/analysis//spectral/fullrun_ccd3_acisf10037_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete