[Tue Apr 10 13:27:26 2012] Detection parameters:
  Position = (557.1, 315.3) = 9 55 50.14 69 40 46.8
  Extent = 0.8" x 0.5", rotation angle = 85 degrees
  Source counts = 31485.7 +/- 181.2
  Background counts = 1351.3
  Rate = 2 +/- 0.01

[Tue Apr 10 13:27:28 2012] Off-axis axis estimate = 3.83'
[Tue Apr 10 13:27:55 2012] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:27:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 13:27:55 2012] Initial guess for spatial extent in simple fitting = 0.78"
[Tue Apr 10 13:27:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.921
[Tue Apr 10 13:27:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.78"
[Tue Apr 10 13:27:57 2012] fullrun_ccd7_acisf10027_pi14-548_cl_pass0_src1.ximg exists
[Tue Apr 10 13:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10027_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 13:27:57 2012] fullrun_ccd7_acisf10027_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Apr 10 13:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10027_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 13:27:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10027_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10027_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:27:57 2012] fullrun_ccd7_acisf10027_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 13:27:57 2012] fullrun_ccd7_acisf10027_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 13:27:57 2012] Fit fullrun_ccd7_acisf10027_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 13:28:09 2012] Spatial fit model total counts = 34904.900000, observed total counts = 34628.000000
[Tue Apr 10 13:28:09 2012] Offset between fit and detection position for source 1 = 0.862802 pixels
[Tue Apr 10 13:28:09 2012] 34363.600000 total counts/ 5119.500000 bgd. counts: snr = 408.718680
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.862802 pixels
  Position = (557.6, 316.0) = 9 55 50.13 69 40 46.8
  Extent = 0.8 (0.8-0.8)", rotation angle = 0
  Source counts = 29244.1 +/- 185.4
  Background counts = 5119.5
  Rate = 2 +/- 0.01
[Tue Apr 10 13:28:09 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:28:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:28:09 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:28:09 2012] Source does appear to be extended
[Tue Apr 10 13:28:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:28:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:28:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 13:28:14 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Tue Apr 10 13:28:14 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.884
[Tue Apr 10 13:28:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.80"
[Tue Apr 10 13:28:15 2012] fullrun_ccd7_acisf10027_pi14-548_cl_pass1_src1.ximg exists
[Tue Apr 10 13:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10027_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 13:28:15 2012] fullrun_ccd7_acisf10027_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Apr 10 13:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10027_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 13:28:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10027_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10027_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:28:16 2012] fullrun_ccd7_acisf10027_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 13:28:16 2012] fullrun_ccd7_acisf10027_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 13:28:16 2012] Fit fullrun_ccd7_acisf10027_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 13:28:20 2012] Spatial fit model total counts = 32176.700000, observed total counts = 33357.000000
[Tue Apr 10 13:28:20 2012] Offset between fit and detection position for source 1 = 0.099979 pixels
[Tue Apr 10 13:28:20 2012] 31377.597000 total counts/ 347.797000 bgd. counts: snr = 1663.857239
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.099979 pixels
  Position = (557.6, 316.1) = 9 55 50.13 69 40 46.9
  Extent = 0.9 (0.9-0.9)", rotation angle = 0
  Source counts = 31029.8 +/- 177.1
  Background counts = 347.8
  Rate = 2 +/- 0.01
[Tue Apr 10 13:28:20 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:28:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:28:20 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:28:20 2012] Source does appear to be extended
[Tue Apr 10 13:28:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:28:28 2012] Not overwriting source region fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_src.reg
[Tue Apr 10 13:28:28 2012] Extracting stamp from image fullrun_ccd7_acisf10027_pi14-548_cl_sm2.00.img.gz, (518, 276) - (598, 356)
[Tue Apr 10 13:28:28 2012] Writing fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1.gif
[Tue Apr 10 13:28:30 2012] ../../acisf10027/products/events/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_src.evt and ../../acisf10027/products/events/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 13:28:30 2012] Size of ../../acisf10027/products/events/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_src.evt.gz[events] = 32108 counts
[Tue Apr 10 13:28:30 2012] Mean chipx,y = (660.37, 488.26)
[Tue Apr 10 13:28:30 2012] Mean tdetx,y = (4577.37, 2190.26)
[Tue Apr 10 13:28:30 2012] chipx,y range = (638.00-694.00, 463.00-513.00)
[Tue Apr 10 13:28:30 2012] Size of ../../acisf10027/products/events/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1088 counts
[Tue Apr 10 13:28:30 2012] ../../acisf10027/products/images/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_src.img and ../../acisf10027/products/images/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 13:28:30 2012] ../../acisf10027/products/spectra/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_src.pi and ../../acisf10027/products/spectra/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 13:28:33 2012] ../../acisf10027/products/lightcurves/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_src.lc and ../../acisf10027/products/lightcurves/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 13:29:26 2012] Keeping rmf generated by specextract
[Tue Apr 10 13:29:26 2012] 225.563
[Tue Apr 10 13:29:28 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:29:28 2012] Error reading totcts from fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Apr 10 13:29:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:29:28 2012] Using photon index=1.80, rate=1.7, arf fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 13:29:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 13:29:28 2012] Updating source flux to 1.3e-11
[Tue Apr 10 13:30:45 2012] Reading fit data from acisf10027/analysis//spectral/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_pl.csv
[Tue Apr 10 13:30:45 2012] Spectral fit parameter nH value = 1.49182e+22
[Tue Apr 10 13:30:45 2012] Spectral fit parameter PhoIndex value = 1.73328
[Tue Apr 10 13:30:45 2012] Failed to get F(0.3-8.0) from acisf10027/analysis//spectral/fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 13:30:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:30:45 2012] Using Nh = 1.5e+22, photon index=1.73, rate=1.7, arf fullrun_ccd7_acisf10027_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 13:30:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 13:30:45 2012] Updating source flux to 2.5e-11