[Tue Apr 10 22:18:33 2012] Detection parameters:
  Position = (200.1, 597.3) = 9 55 50.25 69 40 36.4
  Extent = 0.7" x 0.7", rotation angle = 64 degrees
  Source counts = 911.5 +/- 38.4
  Background counts = 565.5
  Rate = 0.05 +/- 0.002

[Tue Apr 10 22:18:34 2012] Off-axis axis estimate = 3.66'
[Tue Apr 10 22:18:51 2012] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:18:51 2012] Initial guess for spatial extent in simple fitting = 0.73"
[Tue Apr 10 22:18:51 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.006
[Tue Apr 10 22:18:51 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.73"
[Tue Apr 10 22:18:51 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src4.ximg exists
[Tue Apr 10 22:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src4.csv
[Tue Apr 10 22:18:51 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src4_1.ximg exists
[Tue Apr 10 22:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src4.csv
[Tue Apr 10 22:18:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:18:52 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Tue Apr 10 22:18:52 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Apr 10 22:18:52 2012] Fit fullrun_ccd7_acisf10026_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Apr 10 22:18:55 2012] Spatial fit model total counts = 2002.830000, observed total counts = 2003.000000
[Tue Apr 10 22:18:55 2012] Offset between fit and detection position for source 4 = 1.825174 pixels
[Tue Apr 10 22:18:55 2012] 1994.612000 total counts/ 1616.540000 bgd. counts: snr = 9.403322
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.825174 pixels
  Position = (199.7, 595.6) = 9 55 50.34 69 40 35.3
  Extent = 1.5 (1.4-1.5)", rotation angle = 0
  Source counts = 378.1 +/- 44.7
  Background counts = 1616.5
  Rate = 0.02 +/- 0.003
[Tue Apr 10 22:18:55 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:18:55 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:18:55 2012] Source does appear to be extended
[Tue Apr 10 22:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:19:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:19:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 22:19:00 2012] Initial guess for spatial extent in simple fitting = 1.47"
[Tue Apr 10 22:19:00 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Tue Apr 10 22:19:00 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 1.47"
[Tue Apr 10 22:19:00 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src4.ximg exists
[Tue Apr 10 22:19:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src4.csv
[Tue Apr 10 22:19:00 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src4_1.ximg exists
[Tue Apr 10 22:19:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src4.csv
[Tue Apr 10 22:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:19:01 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Tue Apr 10 22:19:01 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Apr 10 22:19:01 2012] Fit fullrun_ccd7_acisf10026_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Apr 10 22:19:04 2012] Spatial fit model total counts = 2372.040000, observed total counts = 2369.000000
[Tue Apr 10 22:19:04 2012] Offset between fit and detection position for source 4 = 0.561834 pixels
[Tue Apr 10 22:19:04 2012] 2369.943000 total counts/ 1896.220000 bgd. counts: snr = 10.878778
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.561834 pixels
  Position = (199.2, 595.6) = 9 55 50.39 69 40 35.3
  Extent = 1.7 (1.3-2.4)", rotation angle = 0
  Source counts = 473.7 +/- 48.7
  Background counts = 1896.2
  Rate = 0.03 +/- 0.003
[Tue Apr 10 22:19:04 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:19:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:19:04 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:19:04 2012] Source does appear to be extended
[Tue Apr 10 22:19:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:19:08 2012] Not overwriting source region fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_src.reg
[Tue Apr 10 22:19:08 2012] Extracting stamp from image fullrun_ccd7_acisf10026_pi14-548_cl_sm2.00.img.gz, (123, 519) - (276, 672)
[Tue Apr 10 22:19:08 2012] Writing fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4.gif
[Tue Apr 10 22:19:19 2012] ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_src.evt and ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Apr 10 22:19:19 2012] Size of ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_src.evt.gz[events] = 4088 counts
[Tue Apr 10 22:19:19 2012] Mean chipx,y = (639.70, 473.09)
[Tue Apr 10 22:19:19 2012] Mean tdetx,y = (4556.70, 2175.09)
[Tue Apr 10 22:19:19 2012] chipx,y range = (608.00-668.00, 450.00-504.00)
[Tue Apr 10 22:19:19 2012] Size of ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 7878 counts
[Tue Apr 10 22:19:19 2012] ../../acisf10026/products/images/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_src.img and ../../acisf10026/products/images/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Apr 10 22:19:19 2012] ../../acisf10026/products/spectra/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_src.pi and ../../acisf10026/products/spectra/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Apr 10 22:19:23 2012] ../../acisf10026/products/lightcurves/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_src.lc and ../../acisf10026/products/lightcurves/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Apr 10 22:19:49 2012] Keeping rmf generated by specextract
[Tue Apr 10 22:19:49 2012] 176.664
[Tue Apr 10 22:19:51 2012] Updating aperture counts using extracted products
[Tue Apr 10 22:19:51 2012] Error reading totcts from fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Apr 10 22:19:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 22:19:51 2012] Using photon index=1.80, rate=0.028, arf fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src4.arf
[Tue Apr 10 22:19:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 22:19:51 2012] Updating source flux to 2.7e-13