[Tue Apr 10 22:18:33 2012] Detection parameters:
  Position = (239.2, 605.8) = 9 55 46.57 69 40 40.6
  Extent = 0.6" x 0.5", rotation angle = 68 degrees
  Source counts = 762.4 +/- 30.1
  Background counts = 144.6
  Rate = 0.05 +/- 0.002

[Tue Apr 10 22:18:34 2012] Off-axis axis estimate = 3.59'
[Tue Apr 10 22:18:51 2012] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:18:51 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Apr 10 22:18:51 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.050
[Tue Apr 10 22:18:51 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.71"
[Tue Apr 10 22:18:51 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src3.ximg exists
[Tue Apr 10 22:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src3.csv
[Tue Apr 10 22:18:51 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Apr 10 22:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src3.csv
[Tue Apr 10 22:18:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:18:52 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Apr 10 22:18:52 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Apr 10 22:18:52 2012] Fit fullrun_ccd7_acisf10026_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Apr 10 22:18:55 2012] Spatial fit model total counts = 968.984000, observed total counts = 969.000000
[Tue Apr 10 22:18:55 2012] Offset between fit and detection position for source 3 = 0.820098 pixels
[Tue Apr 10 22:18:55 2012] 967.372000 total counts/ 295.404000 bgd. counts: snr = 39.096727
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.820098 pixels
  Position = (239.7, 606.4) = 9 55 46.57 69 40 40.7
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 672.0 +/- 31.1
  Background counts = 295.4
  Rate = 0.04 +/- 0.002
[Tue Apr 10 22:18:55 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:18:55 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:18:55 2012] Source does appear to be extended
[Tue Apr 10 22:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:19:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:19:00 2012] Initial guess for spatial extent in simple fitting = 0.75"
[Tue Apr 10 22:19:00 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Tue Apr 10 22:19:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.75"
[Tue Apr 10 22:19:00 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src3.ximg exists
[Tue Apr 10 22:19:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src3.csv
[Tue Apr 10 22:19:00 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Apr 10 22:19:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src3.csv
[Tue Apr 10 22:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:19:01 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Apr 10 22:19:01 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Apr 10 22:19:01 2012] Fit fullrun_ccd7_acisf10026_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Apr 10 22:19:04 2012] Spatial fit model total counts = 953.815000, observed total counts = 960.000000
[Tue Apr 10 22:19:04 2012] Offset between fit and detection position for source 3 = 0.033963 pixels
[Tue Apr 10 22:19:04 2012] 947.112000 total counts/ 260.488000 bgd. counts: snr = 42.542707
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.033963 pixels
  Position = (239.7, 606.4) = 9 55 46.56 69 40 40.7
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 686.6 +/- 30.8
  Background counts = 260.5
  Rate = 0.04 +/- 0.002
[Tue Apr 10 22:19:04 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:19:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:19:04 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:19:04 2012] Source does appear to be extended
[Tue Apr 10 22:19:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:19:08 2012] Not overwriting source region fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_src.reg
[Tue Apr 10 22:19:08 2012] Extracting stamp from image fullrun_ccd7_acisf10026_pi14-548_cl_sm2.00.img.gz, (204, 571) - (275, 642)
[Tue Apr 10 22:19:08 2012] Writing fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3.gif
[Tue Apr 10 22:19:16 2012] ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_src.evt and ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Apr 10 22:19:16 2012] Size of ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_src.evt.gz[events] = 842 counts
[Tue Apr 10 22:19:16 2012] Mean chipx,y = (630.62, 514.33)
[Tue Apr 10 22:19:16 2012] Mean tdetx,y = (4547.62, 2216.33)
[Tue Apr 10 22:19:16 2012] chipx,y range = (608.00-650.00, 494.00-537.00)
[Tue Apr 10 22:19:16 2012] Size of ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 834 counts
[Tue Apr 10 22:19:16 2012] ../../acisf10026/products/images/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_src.img and ../../acisf10026/products/images/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Apr 10 22:19:16 2012] ../../acisf10026/products/spectra/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_src.pi and ../../acisf10026/products/spectra/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Apr 10 22:19:19 2012] ../../acisf10026/products/lightcurves/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_src.lc and ../../acisf10026/products/lightcurves/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Apr 10 22:19:49 2012] Keeping rmf generated by specextract
[Tue Apr 10 22:19:49 2012] 225.505
[Tue Apr 10 22:19:51 2012] Updating aperture counts using extracted products
[Tue Apr 10 22:19:51 2012] Error reading totcts from fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Apr 10 22:19:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 22:19:51 2012] Using photon index=1.80, rate=0.0405, arf fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src3.arf
[Tue Apr 10 22:19:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 22:19:51 2012] Updating source flux to 3.1e-13