[Tue Apr 10 22:18:33 2012] Detection parameters:
  Position = (201.6, 617.7) = 9 55 50.12 69 40 46.4
  Extent = 0.8" x 0.5", rotation angle = 63 degrees
  Source counts = 18082.0 +/- 137.4
  Background counts = 809.0
  Rate = 1 +/- 0.008

[Tue Apr 10 22:18:34 2012] Off-axis axis estimate = 3.81'
[Tue Apr 10 22:18:51 2012] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:18:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 22:18:51 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Apr 10 22:18:51 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.931
[Tue Apr 10 22:18:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.77"
[Tue Apr 10 22:18:51 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src1.ximg exists
[Tue Apr 10 22:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 22:18:51 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Apr 10 22:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 22:18:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10026_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:18:52 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 22:18:52 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 22:18:52 2012] Fit fullrun_ccd7_acisf10026_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 22:18:55 2012] Spatial fit model total counts = 19141.600000, observed total counts = 19135.000000
[Tue Apr 10 22:18:55 2012] Offset between fit and detection position for source 1 = 0.734998 pixels
[Tue Apr 10 22:18:55 2012] 19159.810000 total counts/ 2230.310000 bgd. counts: snr = 358.477181
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.734998 pixels
  Position = (202.1, 618.2) = 9 55 50.12 69 40 46.4
  Extent = 0.8 (0.8-0.9)", rotation angle = 0
  Source counts = 16929.5 +/- 138.4
  Background counts = 2230.3
  Rate = 1 +/- 0.008
[Tue Apr 10 22:18:55 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:18:55 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:18:55 2012] Source does appear to be extended
[Tue Apr 10 22:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:19:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:19:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 22:19:00 2012] Initial guess for spatial extent in simple fitting = 0.85"
[Tue Apr 10 22:19:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Tue Apr 10 22:19:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.85"
[Tue Apr 10 22:19:00 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src1.ximg exists
[Tue Apr 10 22:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 22:19:00 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Apr 10 22:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 22:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10026_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:19:01 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 22:19:01 2012] fullrun_ccd7_acisf10026_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 22:19:01 2012] Fit fullrun_ccd7_acisf10026_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 22:19:04 2012] Spatial fit model total counts = 19021.700000, observed total counts = 19050.000000
[Tue Apr 10 22:19:04 2012] Offset between fit and detection position for source 1 = 0.016001 pixels
[Tue Apr 10 22:19:04 2012] 19021.750000 total counts/ 1999.450000 bgd. counts: snr = 380.682547
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016001 pixels
  Position = (202.1, 618.2) = 9 55 50.12 69 40 46.4
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 17022.3 +/- 137.9
  Background counts = 1999.5
  Rate = 1 +/- 0.008
[Tue Apr 10 22:19:04 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:19:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:19:04 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:19:04 2012] Source does appear to be extended
[Tue Apr 10 22:19:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:19:08 2012] Not overwriting source region fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_src.reg
[Tue Apr 10 22:19:08 2012] Extracting stamp from image fullrun_ccd7_acisf10026_pi14-548_cl_sm2.00.img.gz, (163, 579) - (241, 657)
[Tue Apr 10 22:19:08 2012] Writing fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1.gif
[Tue Apr 10 22:19:09 2012] ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_src.evt and ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 22:19:09 2012] Size of ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_src.evt.gz[events] = 18320 counts
[Tue Apr 10 22:19:09 2012] Mean chipx,y = (657.15, 486.04)
[Tue Apr 10 22:19:09 2012] Mean tdetx,y = (4574.15, 2188.04)
[Tue Apr 10 22:19:09 2012] chipx,y range = (634.00-679.00, 463.00-509.00)
[Tue Apr 10 22:19:09 2012] Size of ../../acisf10026/products/events/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2886 counts
[Tue Apr 10 22:19:09 2012] ../../acisf10026/products/images/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_src.img and ../../acisf10026/products/images/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 22:19:09 2012] ../../acisf10026/products/spectra/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_src.pi and ../../acisf10026/products/spectra/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 22:19:12 2012] ../../acisf10026/products/lightcurves/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_src.lc and ../../acisf10026/products/lightcurves/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 22:19:49 2012] Keeping rmf generated by specextract
[Tue Apr 10 22:19:49 2012] 225.231
[Tue Apr 10 22:19:51 2012] Updating aperture counts using extracted products
[Tue Apr 10 22:19:51 2012] Error reading totcts from fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Apr 10 22:19:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 22:19:51 2012] Using photon index=1.80, rate=1, arf fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 22:19:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 22:19:51 2012] Updating source flux to 7.7e-12
[Tue Apr 10 22:20:33 2012] Reading fit data from acisf10026/analysis//spectral/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_pl.csv
[Tue Apr 10 22:20:33 2012] Spectral fit parameter nH value = 1.28134e+22
[Tue Apr 10 22:20:33 2012] Spectral fit parameter PhoIndex value = 1.78752
[Tue Apr 10 22:20:33 2012] Failed to get F(0.3-8.0) from acisf10026/analysis//spectral/fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 22:20:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 22:20:33 2012] Using Nh = 1.3e+22, photon index=1.79, rate=1, arf fullrun_ccd7_acisf10026_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 22:20:33 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 22:20:33 2012] Updating source flux to 1.4e-11