[Thu Oct  6 09:21:43 2011] Detection parameters:
  Position = (401.0, 457.3) = 17 35 14.50 -28 50 19.6
  Extent = 0.6" x 0.5", rotation angle = 88 degrees
  Source counts = 12.9 +/- 3.6
  Background counts = 0.1
  Rate = 0.006 +/- 0.002

[Thu Oct  6 09:21:43 2011] Off-axis axis estimate = 4.60'
[Thu Oct  6 09:22:01 2011] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 09:22:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 09:22:01 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Thu Oct  6 09:22:01 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.121
[Thu Oct  6 09:22:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.03"
[Thu Oct  6 09:22:01 2011] fullrun_ccd2_acisf10018_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct  6 09:22:01 2011] fullrun_ccd2_acisf10018_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct  6 09:22:01 2011] Fit fullrun_ccd2_acisf10018_pi14-548_cl_pass0_src1 appears to have run properly
[Thu Oct  6 09:22:01 2011] fullrun_ccd2_acisf10018_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 09:22:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10018_pi14-548_cl_pass0_tfrozen_src1.csv
[Thu Oct  6 09:22:01 2011] fullrun_ccd2_acisf10018_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 09:22:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10018_pi14-548_cl_pass0_tfrozen_src1.csv
[Thu Oct  6 09:22:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10018_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10018_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 09:22:07 2011] Spatial fit model total counts = 14.206400, observed total counts = 15.000000
[Thu Oct  6 09:22:07 2011] Offset between fit and detection position for source 3 = 0.786461 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.786461 pixels
  Position = (401.5, 457.9) = 17 35 14.50 -28 50 19.5
  Extent = 0.8 (0.6-1.2)" x 0.4 (0.3-0.7)", rotation angle = 93 (67-126) degrees
  Source counts = 13.6 +/- 3.7
  Background counts = 0.0
  Rate = 0.006 +/- 0.002
[Thu Oct  6 09:22:07 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 09:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 09:22:07 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 09:22:07 2011] Source does appear to be extended
[Thu Oct  6 09:22:07 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.83
[Thu Oct  6 09:22:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 09:22:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 09:22:18 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Thu Oct  6 09:22:18 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.940
[Thu Oct  6 09:22:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.63"
[Thu Oct  6 09:22:18 2011] fullrun_ccd2_acisf10018_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct  6 09:22:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10018_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 09:22:18 2011] fullrun_ccd2_acisf10018_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct  6 09:22:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10018_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 09:22:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10018_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10018_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 09:22:18 2011] fullrun_ccd2_acisf10018_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 09:22:18 2011] fullrun_ccd2_acisf10018_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 09:22:18 2011] Fit fullrun_ccd2_acisf10018_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 09:22:22 2011] Spatial fit model total counts = 14.628000, observed total counts = 15.000000
[Thu Oct  6 09:22:22 2011] Offset between fit and detection position for source 3 = 0.072874 pixels
[Thu Oct  6 09:22:22 2011] 14.033593 total counts/ 0.008093 bgd. counts: snr = 155.903862
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.072874 pixels
  Position = (401.5, 457.8) = 17 35 14.50 -28 50 19.6
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 14.0 +/- 3.7
  Background counts = 0.0
  Rate = 0.007 +/- 0.002
[Thu Oct  6 09:22:22 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 09:22:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 09:22:22 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 09:22:22 2011] Source does appear to be extended
[Thu Oct  6 09:22:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 09:23:06 2011] Not overwriting source region fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_src.reg
[Thu Oct  6 09:23:06 2011] Extracting stamp from image fullrun_ccd2_acisf10018_pi14-548_cl_sm2.00.img.gz, (371, 427) - (432, 488)
[Thu Oct  6 09:23:06 2011] Writing fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3.gif
[Thu Oct  6 09:23:08 2011] ../../acisf10018/products/events/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_src.evt and ../../acisf10018/products/events/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Oct  6 09:23:08 2011] Size of ../../acisf10018/products/events/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_src.evt.gz[events] = 13 counts
[Thu Oct  6 09:23:08 2011] Mean chipx,y = (383.46, 579.77)
[Thu Oct  6 09:23:08 2011] Mean tdetx,y = (3640.77, 3702.54)
[Thu Oct  6 09:23:08 2011] chipx,y range = (366.00-398.00, 559.00-594.00)
[Thu Oct  6 09:23:08 2011] Size of ../../acisf10018/products/events/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1 counts
[Thu Oct  6 09:23:08 2011] ../../acisf10018/products/images/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_src.img and ../../acisf10018/products/images/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Oct  6 09:23:08 2011] ../../acisf10018/products/spectra/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_src.pi and ../../acisf10018/products/spectra/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Oct  6 09:23:08 2011] Not generating rmf since there are only 14 counts
[Thu Oct  6 09:23:11 2011] ../../acisf10018/products/lightcurves/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_src.lc and ../../acisf10018/products/lightcurves/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Oct  6 09:23:14 2011] 184.531
[Thu Oct  6 09:23:20 2011] Updating aperture counts using extracted products
[Thu Oct  6 09:23:20 2011] Error reading totcts from fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct  6 09:23:20 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:23:20 2011] Using photon index=1.80, rate=0.00651, arf fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3.arf
[Thu Oct  6 09:23:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:23:20 2011] Updating source flux to 8.9e-14
[Thu Oct  6 09:23:23 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct  6 09:23:24 2011] acisf10018/analysis//spectral/fullrun_ccd2_acisf10018_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete