NASA Logo, National Aeronautics and Space Administration

Special Guest Blog: Stunning Webb Model Transforms at NASA, Student Engineers Behind the Controls

  • By Maggie Masetti
  • October 17, 2013
  • Comments Off on Special Guest Blog: Stunning Webb Model Transforms at NASA, Student Engineers Behind the Controls

We have a guest blogger today! Laura Betz, a writer for the James Webb Space Telescope, wrote this article for us about the student-built 1/6 scale engineering model of JWST that was recently demoed at NASA Goddard.

There are some moments of my life that I will never forget. Watching a car-sized model of one of the most advanced projects NASA is working on – the James Webb Space Telescope – unfolding at NASA’s Goddard Space Flight Center in Greenbelt, Md. on Aug. 21, 2013 is one of them. Built like a Transformer and controlled robotically by engineering students from California Polytechnic University in Pomona, the model illustrates how Webb will be deployed one million miles out in space.

Credit: Maggie Masetti

Looking like a giant honeycomb sitting on top of futuristic silver-colored sails, once at its destination, Webb, the largest telescope ever built, will see back in time. Because of the way that light travels, this infrared telescope will be capable of capturing images of the universe from 13.4 billion years in light travel time. Experiencing the model deployment firsthand I was floored by the enormity of it all.

“Webb is the next satellite that will see back to the very early universe, to see the first galaxies that were born after the Big Bang,” said model project member Paul Innes. “Nothing like this has ever been done before.”

To demonstrate the sheer size and complexity of this mission, for the past two and a half years these students have been working with their mentors to build the first physical representation of the Webb deployment. The team thought creatively about how, in twenty minutes, they could represent the different stages of deployment to the general public.

A packed room of audience members at NASA Goddard watched the solar array unfold behind the telescope, the sunshield open up and the 18-segmented mirrors move together to form one complete mirror. To make this happen the student engineers even used parts of car antennas, the inside of a flashlight and garden materials to create the model.

Credit: George Sonnenborn

Credit: George Sonnenborn

“This is one of the most complicated and technologically advanced projects,” said model project member Chas Carlson. “The purpose behind the model is to show how it’s going to open up. There’s no way to easily fix any mishaps with the real thing once on-orbit and this model helps to convey the complexity of everything.”

Before Webb is launched into space it needs to be folded up tightly and meticulously. Engineer and model project mentor Joe Pitman explained why this is so important. “We are doing everything we can to fold this massive telescope as small as we can to fit it into the biggest launch vehicle we can,” said Pitman.

Throughout their time engineering this 1/6 scale model of Webb, the team gained valuable hands-on experience in the design, fabrication, assembly, integration and test of complex space systems. Putting together the model once it was shipped from their lab in California took the team 17 hours.

“In school you learn how to make a paper design, but you don’t get this sort of experience,” said Carlson. “You learn how involved and how many steps there are in making something like this. We had five people and each of us took a different element. You can take as many classes as you want but you are not going to get that hands-on experience that you will from working on a project like this one.”

The team used only publicly available information to develop their model of Webb, which they called SDEM, or the Webb telescope Subscale Deployments Engineering Model. In order to unfold the telescope robotically the team had to do a lot of work with electronics.

“I learned how to set up a network, and now I know a lot more about electronics and programming,” said model project member Reed Danis. “We were able to branch out and learn new things.”

Preparing to unfold the model at Goddard, they were surrounded by engineers and scientists that have been working on the actual telescope.

James Webb Space Telescope 1/6 engineering model
Credit: Maggie Masetti

“Giving the presentation in front of project members was cool,” said model project member Adam Chase. “To see as many people on such a high level that are excited about what we’re doing and passionate about the project was definitely cool.”

The teams showcased the model in the same building where the hardware for Webb is coming together and were able to see the engineers working meticulously to put the actual telescope together.

As a team, the student engineers understand how much dedication goes into Webb’s engineering. The students fit work on the model around their regular schoolwork, and in the summers they sometimes worked 60-hour weeks.

“The amount of work that was put into this was crazy. I don’t know any normal person that would have put that much time into this,” said Pitman’s grandson Brady Morrow, who was at Goddard during the model unfolding event. “They tested every piece of this five or six times.”

Engineers Joe Pitman and Eric Grosso guided the student team, who worked to only two requirements: work collaboratively and with only public domain information.

“They succeeded in the face of many difficulties,” said Grosso. “This was a definitely a team project, they had a vision and they saw it thorough.”

One of the biggest challenges the team encountered was shipping something so fragile across the country. They worked very hard to design and build crates that were strong enough.

“Two days ago was the best day for me. I was the lead on the shipping crates, and once we opened it up it, I gave a huge sigh of relief,” said model project member Colin Burt. “I was prepared for the worst and ready for the best. We brought a tool chest, ready to go to war with it. But it all worked out.”

James Webb Space Telescope 1/6 engineering model
Credit: Maggie Masetti

The SDEM model will be at Goddard for the month of September. The team also built a deployable 1/20th scale model [see below] that they gave to Webb Project Manager Bill Ochs of NASA Goddard.

Credit: Maggie Masetti

The engineering students have become incredibly close working on this project. Many of them have transitioned to engineering jobs already. “I’ve gotten a feel for how industry works and been able to meet everyone,” said Innes. “Now I’m working full time for a company and it doesn’t feel like work.”

Credit: Maggie Masetti

The team from left to right: (Back row) Adam Chase, Brady Morrow, Joe Pitman, Chas Carlson and Reed Danis. (Front row) Colin Burt, Eric Grosso and Paul Innes.

The SDEM team
Credit: Laura Betz

See the full set of images of this model on JWST’s Flickr.


Comments are closed.

NASA Logo, National Aeronautics and Space Administration